Transforming your BMW R1200R from halogen to LED with H11 bulbs has never been easier with our specific LED kit. It's an excellent modification for improving your bike's visibility and light output.

Here's a general guide on how to proceed with the transformation:

Tools and materials needed:

H11 LED Conversion Kit (H11 LED Bulbs) TOP SERIES Led SLUX

Screwdriver and tools for removing motorcycle parts (if necessary)

Protections or gloves for handling LED lamps

Steps to follow:

Accessing the halogen lights: Access the halogen lights on your BMW R GS 1200. You can usually reach them through the headlight, which may require removing some fairing parts or the headlight itself. Consult your motorcycle owner's manual for specific instructions.

Remove the halogen bulbs: Release the electrical connector from the back of the H11 halogen bulbs.

Installing new H11 LED bulbs: Take the H11 LED conversion kit and install the LED bulbs into the headlight housing.

Electrical connection: Connect the wires of the new H11 LED bulbs to the motorcycle's electrical system connectors. Be sure to follow the conversion kit's instructions and connect the wires correctly.

Check: Before closing the headlight or reassembling the motorcycle parts, start the motorcycle and check the operation of the new LED bulbs. Make sure they work properly in low and high beam modes.

Headlight height adjustment: With new LED headlights, you may need to adjust the headlight height to avoid dazzling other drivers. You can do this using the height adjusters on your motorcycle or by consulting an experienced mechanic.

Reassembling the dismantled parts: Once you have checked that the LED lights are working correctly and that the headlight height has been adjusted, reassemble all the motorcycle parts that you had previously dismantled.

24 month warranty

All items are tested before shipping

For further information and clarifications, do not hesitate to contact us.