PDC Parking Sensor Control Unit 95B919475C Porsche Replacement Module

What is it for?

The control unit with code 95B.919.475.C manages the car's entire parking assistance system. Its main functions are:

• Process signals sent by ultrasonic sensors located on the front and rear bumpers.

• Calculate the distance to obstacles.

• Send audible warnings (the classic "beeps" that increase in frequency) and visual warnings on the on-board infotainment screen.

• Interface (depending on the car's options) with the rear camera or the 360° camera system ( Real Topview ).

Where should it be installed? (Location)

On the Porsche Macan (specifically the first series produced approximately between 2014 and 2018), this control unit is located inside the luggage compartment (trunk), on the right side (passenger side) , hidden behind the side carpet trim panel.

Helpful Hint: This is a critical location. If you're replacing this control unit because the parking system has stopped working (or the sensors are constantly beeping with no obstructions), carefully check that there are no signs of moisture or water infiltration in that area of the trunk. On Macans, the sunroof drain pipes can become blocked, allowing water to drip right over this control unit and cause a short circuit.

Main Compatibilities

In addition to the Porsche Macan , this identical part number is also used on:

• Porsche Boxster (981) * Porsche Cayman (981C) (Generally for production years 2014 to 2016/2018).